Each new ReLog unit is calibrated before being shipped from our facilities. However, as this type of instruments normally are exposed to harsh environments in terms of vibrations, shocksn high temperatures and even radiation there is a slight risk that changes in sensitivity and accuracy can occur. As a result, we recommend that each ReLog is periodically checked and calibrated at least once every year. The timing does of course depend on how the unit has been used but one year works well as an average. This is best performed by shipping the unit back to us for recalibration at our facilities. The recalibration will ensure sensitivity and accuracy to remain at such a level that you can rely on the ReLog. At the same time, we will take the opportunity to apply any relevant updates to the software/firmware that we've made since dispatching the unit to you. If you need it, we will of course include additional mounting screw and mounting tape.
Power your IoT applications with ReVibe's harvestersNever has it been easier to power an IoT application by using vibrations! ReVibe's products are state-of-the-art harvesters that allows the user to harvest ambient vibrations and turn them into electricity. This electricity can be used to power most wireless sensor systems on the market.
On-site support included - a full day workshopWith the development kit you will get a full day workshop where we help you understand the possibilities with using vibration energy harvesting and ReVibe's products in particular. We will go through everything from a basic introduction to understand the benefits with energy harvesting with your applications in mind, learning about how to use the harvester and finally how it can be implemented into your operational environment. In order to make sure the harvester is tuned perfectly for your environment we will perform a vibration evaluation (if the vibration profile is made available) and adapt the unit in accordance with the results.
- Vibration analysis and tuning prior to delivery
- On site delivery and support during installation and evaluation
- Hands on workshop: Implementing vibration energy harvesting into your applications
- One modelA, modelD or modelQ evaluation kit:
- 1 harvester with AC output
- Aluminium holder for easy mounting
- Industrial grade connecting cable
The ideal data logger for capturing and monitoring vibrations, shocks and impacts. With a superior battery life and up to 64 GB of memory, the ReLog is the perfect tool for monitoring vibrations in most environments. It has been designed to be extremely easy to handle, and by the touch of a button you will be up and running and measuring with up to 25,000 Hz sampling rate. With its waterproof housing there really are very few limitations to where you can use the ReLog! And when you're done measuring the included software will make sure you have perfectly structured files that are easy to analyse and work with.
The IoT development Kit has been created for you - the experimental user who wants to test out energy harvesting in combination with sensor functionalities. The kit provides an easy-to-use platform where you will receive one modelD harvester (tuned for your desired center frequency), a S6AE101A PMIC (Power Management Integrated Circuit) designed for energy harvesting and a Cypress BLE-Module that transmits sensor readings from the node to any device capable of receiving BLE signals. The kit also comes with a USB port controller device which can be connected to a PC where the signals can be received if a mobile bluetooth receiver isn't available. Features:
- one (1) modelD harvester
- Holder for modelD
- Industrial grade connector
- Connecting cable from the harvester to the BLE/PMIC
- Energy harvesting motherboard from Cypress including these components
- S6AE101A ultra low power Energy Harvesting PMIC
- CYBLE-022001-00 EZ-BLE PRoC Module
- CY7C65213 USB-UART LP Bridge Controller
- MB39C022G LDO
- BLE-USB Bridge from Cypress including these components
- CY8C58LP PSoC 5LP
- CYBL10162 PRoC BLE
- USB Standard A to Mini-B cable
The modelQ is a miniaturized but yet powerful harvester that has been developed to operate in the most demanding areas in terms dimensions of the harvester. Measuring only 25x25x25 mm it's a small but powerful product that is perfectly suited to power wireless sensor/monitoring systems . The evaluation kit contains the following products:
- One (1) modelQ harvester
- One (1) modelQ holder
- One (1) connecting cable with two open ends
Are you in need of a reliable power source that can withstand the harshest of environments? Then modelA is the product for you. Please choose your desired frequency and acceleration below. The evaluation kit contains the following products:
- One (1) modelA harvester
- One (1) Lemo connecting cable with two open ends
The modelA is currently out of stock - please reach out for a quotation!