ReVibe ANURA™

A technical overview of ReVibe ANURA

Technical overview of ReVibe ANURA

System specifications

The table below provides a technical overview of ReVibe ANURA and its capabilities.

The wireless sensor nodes contain proprietary vibration energy harvesting (VEH) technology from ReVibe Energy. The VEH units converts vibrations created by the vibrating screen itself and turns it into the power to make the sensor nodes completely autonomous.

The sensor nodes contain proprietary vibration energy harvesting (VEH) technology from ReVibe Energy. The VEH units converts vibrations created by the vibrating screen itself and turns it into the power needed for VibScreen Connect.

The system includes up to 8 sensor nodes that all measures vibrations and temperature continuously.

The system will monitor a range of variables that when analyzed provides fault indications:

  • Ramp-up and ramp-down
  • Natural frequency
  • Spring failure
  • Loose parts
  • Bearing analysis
  • Pegging/blinding
  • Screen overload
The sensor nodes are easily attached to the vibrating screen by the use of strong magnets. The gateway will be mounted in close vicinity to the vibrating screen.
The 6 sensor nodes uses BLE (Bluetooth Low Energy) to communicate with the BLE Gateway. The gateway communicates the data via Ethernet, WiFi or 4G depending on the customer environment.
All units, sensor nodes and the gateway, are built for IP69K classification to withstand the harshest environments.

Feature

Description

Self-powered sensor nodes

The wireless sensor nodes contain proprietary vibration energy harvesting (VEH) technology from ReVibe Energy. The VEH units converts vibrations created by the vibrating screen itself and turns it into the power needed to make the sensor nodes completely self-powered.

Easy set up & fit-and-forget installation

The sensor nodes are easily fitted on the vibrating screen using strong magnets. Once the gateway is plugged in and the screen is started, you will be immediately up and running.

No of sensor nodes per vibrating screen

Up to 16

Measurements

3 Axis accelerometer
Dynamic range: +/-16g
Sampling rate: Configurable, up to 16kHz
Accelerometer bandwidth: XY-plane DC to 4kHz, Z-axis DC to 1.6kHz

Time synchronization between sensor nodes

<5𝞵s, 99.9 % of the time

Communication

Sensor nodes: 2.4GHz, 50m line of sight
Transceivers and Base Hub Gateway: Ethernet

 

Environmental

Sensor node ingress protection: IP67
Operating temperature: -40°C to +80°C (-4°F to +176°F)

Get in touch with one of our experts

and see if ReVibe ANURA is the remote monitoring system for you

Our experts are looking forward to hearing from you to assess your situation and provide our recommendations if ReVibe ANURA is the right choice for you. Throughout the dialogue, our experts will look closer at your particular machines, evaluate the situation you are in and make suggestions on how ReVibe ANURA can be integrated and show you the results you can anticipate by using our system. 

Get in touch

Use the ReLog for offline measurements

if you prefer to perform the measurements yourself

If you do not feel ready for a complete condition monitoring system, we offer our vibration data logger – the ReLog. The ReLog can be used to manually gather vibration measurements from the vibrating screen. These can then be analyzed and evaluated through our software VibInspect where you can perform the most relevant analysis, such as an orbit plot, an FFT and spectrogram. 

Learn more
Back